Section 322.52. Documentation.

 

(1)   Compliance software tools. Documentation verifying that the methods and accuracy of the compliance software tools conform to the provisions of this subchapter shall be provided to the inspector.

(2)   Compliance report. Compliance software tools shall generate a report that documents that the proposed design has annual energy costs less than or equal to the annual energy costs of the standard reference design. The compliance documentation shall include all of the following information:

(a) Address of the dwelling.

(b)

1. An inspection checklist documenting the building component characteristics of the proposed design as listed in Table 322.53-1.

2. The inspection checklist shall show the estimated annual energy cost for both the standard reference design and the proposed design.

(c) Name of individual completing the compliance report.

(d) Name and version of the compliance software tool.

(3)   Additional documentation. The inspector may require any of the following documents:

(a) Documentation of the building component characteristics of the standard reference design.

(b) A certification signed by the builder providing the building component characteristics of the proposed design as given in Table 322.53-1.

CR 08-043 : cr. Register March 2009 No. 639 , eff. 4-1-09; correction in (2) (b), (3) (b) made under s. 13.92 (4) (b) 7. , Stats., Register December 2011 No. 672 .

Note

REM/Rate is an acceptable software program for determining compliance with this section. Microsoft Windows NT 6.1.7601 Service Pack 1