Section 544.03. Definitions.

  In this chapter:

(1)  "Bi-metal container" means a container for beverages that is made primarily of a combination of steel and aluminum.

(2)  "Co-collection system" means a system for collecting recyclable materials from residential properties, that does not physically separate and maintain separation of solid waste from recyclable materials during collection and transportation, for processing and marketing. It includes curbside collection and drop-off collection.

(3)  "Container board" means corrugated paperboard used in the manufacture of shipping containers and related products.

(4)  "Curbside collection" means a system for collecting recyclable materials from residential properties, including from the curb, alley, backyard or roadside, and for transporting the recyclable materials for processing and marketing.

(5)  "Current service area" has the meaning specified in s. 287.07 (7) (b) 1. a. , Stats.

(6)  "Department" means the department of natural resources.

(6m)  "Designated agent" means any person who, on behalf of or by agreement with the owner or operator of a multi-family dwelling, a non-residential facility or property, provides goods or services at that location.

(7)  "Drop-off collection" means a system for collecting recyclable materials in which the recyclable materials are taken by individuals to designated collection sites and deposited into designated containers from which the recyclable materials are transported for processing and marketing.

(8am)  "Floodplain" means the land which has been or may be hereafter covered by flood water during the regional flood as defined in ch. NR 116 , and includes the floodway and the flood fringe as defined in ch. NR 116 .

(9)  "HDPE" means high density polyethylene.

(10)  "LDPE" means low density polyethylene.

(11)  "Magazines" means magazines and other materials printed on similar paper.

(12)  "Materials recovery facility" has the meaning specified in s. 287.27 (1) , Stats.

(12m)  "Mixed waste" means municipal solid waste from which recyclable materials have not been separated for recycling.

(13)  "Multiple-family dwelling" means a property containing 5 or more residential units, including those which are occupied seasonally.

(14)  "Multiple-municipality responsible unit" means a responsible unit that is made up of more than one unit of government or solid waste management system.

(18)  "Municipality" has the meaning specified in s. 287.01 (4) , Stats.

(19)  "Newspaper" means a newspaper and other materials printed on newsprint.

(21)  "Non-residential facilities and properties" means commercial, retail, industrial, institutional and governmental facilities and properties. It includes any location at which goods or services are provided or manufactured, including locations under construction, demolition or remodeling, or used for special events such as, but not limited to, fairs, festivals, sport venues, conferences and exhibits.

(21am)  "Nuisance conditions" means conditions which result in an unreasonable threat or danger to public health, safety or welfare, or to the environment.

(22)  "Office paper" means high grade printing and writing papers from offices in non-residential facilities and properties. Printed white ledger and computer printout are examples of office paper generally accepted as high grade. This term does not include industrial process waste.

(23)  "Operating solid waste treatment facility" has the meaning specified in s. 287.07 (7) (b) 1. b. , Stats.

(26)  "Person" has the meaning specified in s. 287.01 (5m) , Stats.

(27)  "PETE" means polyethylene terephthalate.

(27m)  "Plastic container" means a rigid plastic container including those made of PETE (#1), HDPE (#2), PVC (#3) , LDPE (#4), PP (#5), PS (#6), and other resins or multiple resins (#7).

(28)  "PP" means polypropylene.

(28m)  "PS" means polystyrene.

(29)  "PVC" means polyvinyl chloride.

(30)  "Postconsumer waste" has the meaning specified in s. 287.01 (7) , Stats.

(31g)  "Processing" means baling, shredding, pulverizing, composting, separating or otherwise treating or altering by some means to facilitate the further transport, recycling or reuse of solid waste intended to be recycled or reused.

(31r)  "Processing facility" has the meaning specified in s. NR 500.03 (181) , but does not include facilities where combustion of solid waste occurs.

(32)  "Public information and education program" means a program to inform citizens, businesses and institutions why and how to participate in community recycling, reduce overall waste and encourage personal actions that result in voluntary compliance.

(33)  "Recyclable materials" means materials listed in s. 287.07 (1m) to (4) , Stats.

(33m)  "Recycling" means the series of activities by which solid waste is collected, sorted, processed and converted into raw materials and used in the production of new materials. It excludes the use of these materials as a fuel substitute or for energy production.

(34)  "Region" has the meaning specified in s. 287.01 (8) , Stats.

(35)  "Residual material" means recyclable materials collected for recycling that are damaged or contaminated during collection or processing to the point that they are no longer marketable.

(36)  "Responsible unit" has the meaning specified in s. 287.01 (9) , Stats.

(37)  "Reuse" means using a product more than once in its same form for the same or other productive purposes.

(38)  "Rural municipality" means a municipality with a permanent population of 70 persons per square mile or fewer, as determined under s. 287.24 (1) , Stats.

(39)  "Single commodity materials recovery facility" means a facility where only one of the materials specified in s. 287.07 (3) and (4) , Stats., not mixed with other solid waste, is processed for reuse or recycling by conversion into a consumer product or a product which is used as a raw material in a commercial or industrial process.

(39g)  "Single-stream collection" means a system for co-mingled collection of recyclable fibers, containers or other recyclable materials in which these materials are separated from solid waste at the point of collection and are transported to a processing facility to be sorted into marketable commodities.

(39m)  "Solid waste" has the meaning specified in s. 289.01 (33) , Stats.

(41)  "Waste reduction" means decreasing the quantity of waste materials or products generated.

(41am)  "Wetland" has the meaning specified in s. 23.32 (1) , Stats.

(42)  "Yard waste" has the meaning specified in s. 287.01 (17) , Stats.

History: Cr. Register, September, 1993, No. 453 , eff. 10-1-93; correction in (17) made under s. 13.93 (2m) (b) 7., Stats., Register January 2003 No. 565 ; CR 04-113 : r. (1), (8), (16), (17), (20), (24), (25), (31) and (40), renum. (2) to be (1) and am., cr. (2), (6m), (12m), (27m), (28m), (31g), (31r), (33m), and (39g), am. (7), (12), (21), (37), (39) and (41) Register June 2005 No. 594 , eff. 7-1-05; correction in (38) made under s. 13.92 (4) (b) 7., Stats., Register June 2013 No. 690 .

Note

Plastic containers made of HDPE and regulated under ch. ATCP 137 will have a triangular symbol with number "2". Microsoft Windows NT 6.1.7601 Service Pack 1 Plastic containers made of LDPE and regulated under ch. ATCP 137 will have a triangular symbol with number "4". Microsoft Windows NT 6.1.7601 Service Pack 1 The definition of a materials recovery facility, as given in s. 287.27 (1) , Stats., provides "In this section, `materials recovery facility' means a facility where the materials specified in sub. (4) (b) or s. 287.07 (3) or (4) , not mixed with other solid waste, are processed for reuse or recycling by conversion into a consumer product or a product which is used as a raw material in a commercial or industrial process. `Materials recovery facility' does not include a facility operated by a pulp or paper mill which utilizes fiber or paper that has been separated from waste for use as a raw material in a commercial product." Microsoft Windows NT 6.1.7601 Service Pack 1 Plastic containers made of PETE and regulated under ch. ATCP 137 will have a triangular symbol with number "1". Microsoft Windows NT 6.1.7601 Service Pack 1 Plastic containers made of PP and regulated under ch. ATCP 137 will have a triangular symbol with number "5". Microsoft Windows NT 6.1.7601 Service Pack 1 Plastic containers made of PS and regulated under ch. ATCP 137 will have a triangular symbol with number "6". Microsoft Windows NT 6.1.7601 Service Pack 1 Plastic containers made of PVC and regulated under ch. ATCP 137 will have a triangular symbol with number "3". Microsoft Windows NT 6.1.7601 Service Pack 1