Section 93.200. Adoption of standards.

 

(1)   Incorporation by reference. The standards listed in Tables 93.200-1 to 93.200-11 are hereby incorporated by reference into this chapter.

(2)   Alternate standards. Alternate standards that are equivalent to or more stringent than the standards incorporated by reference in this chapter may be used in lieu of incorporated standards if the alternate standard is approved by the department, or if written approval is issued by the department in accordance with s. ATCP 93.130 , under all of the following conditions:

(a) Determination of approval shall be based on an analysis of the alternate standard and the incorporated standard, prepared by a qualified independent third party or the organization that published the incorporated standard.

(b) The department may include specific conditions in issuing an approval, including an expiration date for the approval. Violations of the conditions under which an approval is issued shall constitute a violation of this chapter.

(c) If the department determines that the alternate standard is not equivalent to or more stringent than the standards incorporated by reference, the request for approval shall be denied in writing.

(d) The department may revoke an approval for any false statements or misrepresentations of facts on which the approval was based. The department may re-examine an approved alternate standard or issue a revised approval at any time.

CR 07-029 : cr. Register November 2008 No. 635 , eff. 2-1-09; CR 09-017 : am. Tables 2 and 9 Register July 2009 No. 643 , eff. 8-1-09; correction in (1), (2) (intro.) made under s. 13.92 (4) (b) 7. , Stats., Register December 2011 No. 672 ; corrections in (1), (2) (intro.) made under s. 13.92 (4) (b) 7. , Stats., Register October 2013 No. 694 .

Note

Copies of the adopted standards are on file in the offices of the department and the legislative reference bureau. Copies of the standards may be purchased through the respective organizations listed in Tables 93.200-1 to 93.200-11. Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-1 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-2 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-3 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-4 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-5 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-6 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-7 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-8 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-9 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-10 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1 Several other UL design standards are indirectly applied by this chapter through their inclusion in other standards that are directly adopted in this chapter. For example, UL 58, 80, 142, 1316, 1746, 2080 and 2085 are included in NFPA 30, in section 21.4.2, which is adopted in Table 93.200-6. Microsoft Windows NT 6.1.7601 Service Pack 1 Table 93.200-11 - See PDF for table Microsoft Windows NT 6.1.7601 Service Pack 1