Section 809.561. Maximum residual disinfectant level goals (MRDLGs), and maximum contaminant levels (MCLs) for disinfection byproducts, maximum residual disinfectant levels (MRDLs) and best available treatment.  


Latest version.
  • (1) Maximum residual disinfectant level goals. MRDLGs for disinfectants are as follows: - See PDF for table PDF
    (2) Maximum contaminant levels. The maximum contaminant levels (MCLs) for disinfection byproducts are as follows: - See PDF for table PDF
    (3) Maximum residual disinfectant levels.
    (a) The maximum residual disinfectant levels (MRDLs) for disinfectants are as follows: - See PDF for table PDF
    (b) To achieve compliance with the maximum residual disinfectant levels identified in this subsection, water suppliers shall control treatment processes by reducing disinfectant demand and by controlling disinfection treatment processes to reduce disinfectant levels.
    (c) Free chlorine or total chlorine may be measured for demonstrating compliance with the chlorine MRDL. Combined chlorine or total chlorine may be used for demonstrating compliance with the chloramine MRDL.
    (4) Best available treatment. The department, pursuant to section 1412 of the Safe Drinking Water Act and related regulations applicable to public water systems, identifies the following as the best available treatment technology, treatment techniques or other means available for achieving compliance with the maximum contaminant levels for disinfection byproducts identified in sub. (1) : - See PDF for table PDF
    (5) Alternative treatment. The department may approve the use of alternative treatment not listed in sub. (4) , if a water supplier demonstrates to the department, using pilot studies or other means, that the alternative treatment is sufficient to achieve compliance with the MCLs in sub. (2) .
CR 09-073 : cr. Register November 2010 No. 659 , eff. 12-1-10; CR 15-049 : cr. (3) (c), am. (4) Register March 2016 No. 723 , eff. 4-1-16.