Section 422.13. Flat wood panel coating — part 1.

 

(1)   Applicability. This section applies, subject to the provisions of s. NR 425.03 , to the coating lines of flat wood panel facilities involved in the surface coating of printed interior panels made of hardwood plywood and thin particleboard, natural finish hardwood plywood panels, or hardboard paneling with class II finishes. This section does not apply to the manufacture of exterior siding, tileboard, or particleboard used as a furniture component; or to sources exempted under s. NR 422.03 .

(2)   Emission limitations. No owner or operator of a flat wood panel coating line may cause, allow or permit the emission of any VOCs from a coating application system in excess of:

(a) 2.9 kilograms per 100 square meters of coated finished product (6.0 pounds per 1,000 square feet) from printed interior panels, regardless of the number of coats applied.

(b) 5.8 kilograms per 100 square meters of coated finished product (12.0 pounds per 1,000 square feet) from natural finish hardwood plywood panels, regardless of the number of coats applied.

(c) 4.8 kilograms per 100 square meters of coated finished product (10.0 pounds per 1,000 square feet) from class II finishes on hardboard panels, regardless of the number of coats applied.

Renum. from NR 154.13 (4) (k), Register, September, 1986, No. 369 , eff. 10-1-86; am. (2) (intro.), Register, February, 1990, No. 410 , eff. 3-1-90; CR 08-102 : am. (title) Register July 2009 No. 643 , eff. 8-1-09.