Section 279.16. Standards of performance for new sources (NSPS).

 

(1)  Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): - See PDF for table

1 See footnote following table in s. NR 279.13 (4) .

2 Within the range of 6.0 to 9.0

(2)  The limits set forth in sub. (1) shall be multiplied by the following factors to calculate the maximum for any one day and maximum average of daily values for 30 consecutive days.

(a) Size factor. - See PDF for table

(b) Process factor. - See PDF for table

(3)  The following allocations constitute the quantity and quality of pollutants or pollutant properties controlled by this subsection and attributable to ballast, which may be discharged after the application of best practicable control technology currently available, by a point source subject to this subcategory, in addition to the discharge allowed by sub. (2) . The allocation allowed for ballast water flow, as kg/cu m (lb/M gal), shall be based on those ballast waters treated at the refinery. - See PDF for table

(4)  The quantity and quality of pollutants or pollutant properties controlled by this subsection, attributable to once-through cooling water, are excluded from the discharge allowed by sub. (2) . Once-through cooling water may be discharged with a total organic carbon concentration not to exceed 5 mg/l.

History: Cr. Register, October, 1986, No. 370 , eff. 11-1-86.

Note

See the comprehensive example in s. NR 279.42 (2) (c) . Microsoft Windows NT 6.1.7601 Service Pack 1 1 See footnote following table in s. NR 279.13 (4) . Microsoft Windows NT 6.1.7601 Service Pack 1 2 Within the range of 6.0 to 9.0. Microsoft Windows NT 6.1.7601 Service Pack 1